We are a participant in the Amazon affiliate program. We may earn a small commission through successful purchases from recommended links. Learn more.

3 Easy Ways of How to Remove Exhaust Hangers in 2021

Your vehicle’s exhaust system is a component that may fail from time to time; therefore, it is essential to know how to remove exhaust hangers. The exhaust system is nearest to the road and found underneath your car’s engine. As a result, when you go over that annoying curb, it is likely to be damaged. However, there is no need to panic as this is common. The “exhaust hanger” is a part of the exhaust system, which can be easily replaced. Let us go through how to remove exhaust hangers.

Contents show

What is an Exhaust Hanger?

The attachments that hold and secure the exhaust pipes underneath the car are exhaust system hangers or exhaust supports. The exhaust hangers are often composed of rubber to withstand engine vibrations and to permit the exhaust to bend as the vehicle drives. In addition, they are essential for securely fastening the exhaust and reducing cabin noise and vibration.

Reasons Why You Need to Remove Exhaust Hangers

01. Exhaust Hangs Low

An exhaust that hangs lower than usual is one of the first signs of an exhaust hanger problem. Rubber exhaust system hangers tend to dry out and break over time. If an exhaust hanger fails, the car’s exhaust pipes may hang low and visible beneath the vehicle due to a lack of support.

02. Exhaust is Loud

A thunderous exhaust is yet another sign of a probable issue. An exhaust leak can occur if any of the exhaust pipes rupture due to a lack of support. In addition, a hissing noise may be heard from beneath the car, which is particularly noticeable when the brake is applied.

03. Decreased Power, Acceleration, and Fuel Consumption

Engine power difficulties are another sign of a prospective malfunction. If either of the exhaust hangers falters, they might put extra strain on the vehicle’s exhaust pipes, causing them to shatter. Defective exhaust pipes may cause an exhaust leak, which will produce a loss in power, acceleration, and fuel consumption.

Exhaust Hanger Removal Tool Description

Exhaust hangers are removed using a particular pair of pliers. The rubber supports are separated from the exhaust hanger brackets with these pliers. The tool works on all foreign and domestic automobile exhaust systems. If you do not have these pliers, though, that is fine. Exhaust hangers may be removed in a variety of methods.

 

3 Easy Ways of How to Remove Exhaust Hangers

01. How to Remove Exhaust Hangers with A Screwdrive

Materials needed:

  • Exhaust Hanger(s)
  • Car Jack and Jack Stands
  • Mechanic’s Creeper
  • Screwdriver
  • Safety Glasses
  • Wire Cutters
  • Lubricant (Optional)
  • Owner’s manual

Step 1: Secure Your Automobile by Jacking It Up.

Working beneath a car might be the riskiest thing a home mechanic can do. To support the automobile, be sure to use excellent quality jack stands and support it from the factory-recommended jack locations. The optimal jack point positions should be listed in your car’s owner’s manual.

Step 2: Look for The Broken Hanger.

Because some hangers may be slightly ripped or severely damaged, be extra cautious when inspecting them, as yanking on them too hard may cause them to tear altogether, allowing the exhaust to fall out. It may be helpful to spend a little extra time replacing all the exhaust hangers.

Step 3: Remove the Hanger.

Put on your safety glasses and use your wire cutters to snip the hangers off. The hangers generally include a steel cable embedded in the rubber, making them harder than they appear. You can use some lubricant to take the hangers off if you are having trouble.

Step 4: Assemble the New Hanger.

The hanger should be stretched over the bracket with the help of your screwdriver. Before installing a hanger that must be pressed onto a pin, it may be beneficial to lubricate the hanger.

Step 5: Test the New Hanger.

After securing the automobile on the floor, shake the exhaust pipe vigorously. Due to the improved hangers, it should move without clashing with anything below the vehicle. Next, check that everything is in functioning condition by driving over a few speed bumps.

 

02. How to Remove Exhaust Hangers Using Needle Nose Pliers or Exhaust Hanger Removal Pliers

Materials needed:

  • Exhaust Hanger(s)
  • Car Jack and Jack Stands
  • Mechanic’s Creeper
  • Needle Nose Pliers or Exhaust Hanger Removal Pliers
  • Safety Glasses
  • Wire Cutters
  • Lubricant (Optional)
  • Owner’s manual

Step 1: Secure Your Automobile by Placing It On The Car Jack Supports.

Working beneath a car might be the riskiest thing a home mechanic can do. To support the automobile, be sure to use excellent quality jack stands and support it from the factory-recommended jack locations. The optimal jack point positions should be listed in your car’s owner’s manual.

Step 2: Look Beneath Your Automobile for The Broken Hanger.

Because some hangers may be slightly ripped or severely damaged, be extra cautious when inspecting them, as yanking on them too hard may cause them to tear altogether, allowing the exhaust to fall out. It may be helpful to spend a little extra time replacing all the exhaust hangers.

Step 3: Remove the Hanger.

Put on your safety glasses and use your wire cutters to snip the hangers off. The hangers generally include a steel cable embedded in the rubber, making them harder than they appear. You can use some lubricant to assist take the hangers off if you are having trouble pulling them off.

Step 4: Assemble the New Hanger.

It is now time for the pliers to shine. It is the simplest technique to get rid of exhaust hangers. Take the plier and gently grasp the hanger. The hanger will shrink, making clearance for the exhaust pipe to exit.

Step 5: Test the New Hanger.

If everything appears to be in order, place the vehicle on the ground and drive over a few speed bumps to ensure that everything is in working order.

 

03. How to Remove Exhaust Hangers Without Using a Tool

Materials needed:

  • You do not need any special tools at all for this

Step 1: Loosen the Hanger.

Using your hand, loosen the hanger as much as possible. It will alleviate the hanger’s tension at first, allowing you to go on to the next phase in the removal process.

Step 2: Jack Up Your Car.

To keep the exhaust line in place, use a stand. It is not always required to do so. However, if you want your job to be perfect, you may use this approach.

Step 3: Soak A Hanger in Soapy Water.

The water within the hanger will cause it to become slick and simple to remove. Therefore, it should be sprayed from both the front and the rear. The hanger is thus lubricated.

Step 4: Remove the Hanger.

Using your hand, carefully remove the hanger and pull the pipe out.

Step 5: Hand-Install the Hanger.

Hanger holes should be inserted into the exhaust and vehicle mounting locations.

Some Dos and Don’ts for Successfully Removing Your Exhaust Hanger

Do’s

  • For further work, unplug the car’s battery. It will lighten the stress on the entire exhaust system.
  • Disconnect all the vehicle’s oxygen sensors. Under any circumstances, your safety takes first. Therefore, it would be best if you worked in a safe setting with no potential for risk.
  • Always use lubrication.

Don’ts

  • Do not just yank out the exhaust hanger. There will be a slew of issues because of this.
  • If your automobile is running, do not get beneath it.

Frequently Asked Questions About Exhaust Hangers

01. What is the Purpose of an Exhaust Hanger?

The mounts that secure and support the exhaust pipes to the vehicle’s underside are exhaust hangers. The exhaust hangers are often composed of rubber to absorb engine vibrations and to allow the exhaust to bend as the vehicle drives.

02. Do Exhaust Hangers Go Bad?

The exhaust hanger might survive for years in the end. It can survive more than ten years in cars that travel primarily on flat terrain and less than ten years in vehicles that travel on bumpier roads.

03. Can You Drive with Exhaust Hanging Off?

While it is theoretically possible to drive with a damaged exhaust system, it is neither safe nor legal, and it causes several problems while on the road.

04. How Much Does It Cost to Fix a Hanging Exhaust Pipe?

A dangling or loose pipe is simple to repair. For about $30.00, you can get your car’s exhaust, and muffler tightened/welded at any good exhaust and muffler shop.

05. Is Exhaust Vibration Normal?

A variety of factors can cause vibrations in a car, but one of the most prevalent is an exhaust leak. When you are driving, you will notice a little continuous vibration that becomes stronger as you accelerate. For example, the steering wheel or the gas pedal will often vibrate because of a tiny exhaust leak.

Conclusion

You can avoid having to deal with various exhaust issues. Regardless of whether you have detected a problem, get your exhaust system examined every year. However, if your exhaust hanger needs to be replaced, remove it using one of the techniques listed above and get started on your project today!

Leave a Comment